Meshing a surface into shells
A surface is given as a mesh of its faces, here a grid. divisions keeps those faces, each cut into
n x n elements, quads staying quads; without it, the surface is meshed again in triangles of the size
asked for, finer where refine says. groups names the edge the slab is held along.

The model before it is solved: its parts, supports (red) and loads (blue).
Open in 3D turn it, cut it, hide parts: in xfea's viewer, in your browser
The script
Section titled “The script”examples/scripts/02_core_concepts/geometry_and_meshing/mesh_a_surface.py. Run it from the repository with uv run python examples/scripts/02_core_concepts/geometry_and_meshing/mesh_a_surface.py, or, with xfea-examples installed, xfea-examples run 02_core_concepts/geometry_and_meshing/mesh_a_surface.py.
from xfea.geometry import Meshfrom xfea.meshing import MeshingSettingsfrom xfea.meshing import Refinefrom xfea.meshing import Selectfrom xfea.model import ElasticIsotropicfrom xfea.model import Modelfrom xfea.model import Partfrom xfea.model import ShellSectionfrom xfea_examples import show_viewer
concrete = ElasticIsotropic(E=30_000, v=0.2, density=2.4e-9) # N, mm, tsection = ShellSection(t=200, material=concrete)
model = Model(name="mesh_a_surface")slab = model.add_part(Part(name="slab"))slab.base_geometry = Mesh.from_meshgrid(4000, 8, 2000, 4) # 4 m by 2 m in the xy plane, 8 x 4 quads
# The grid as it is: 32 quads.slab.mesh(settings=MeshingSettings(divisions=1), section=section)print(f"divisions=1: {len(slab.elements)} elements of {len(slab.elements[0].nodes)} nodes")
# Each quad cut 2 x 2, quadratic: 128 eight-node quads.slab.mesh(settings=MeshingSettings(divisions=2, element_order=2), section=section)print(f"divisions=2, order 2: {len(slab.elements)} elements of {len(slab.elements[0].nodes)} nodes")
# Meshed again in quadratic triangles of 250 mm, finer round a column head at the centre, the edge at x = 0 named.slab.mesh( settings=MeshingSettings(max=250, element_order=2, refine=[Refine.around((2000, 1000, 0), radius=200, size=50, reach=400)]), groups={"held_edge": Select.edges(on_plane=((0, 0, 0), "x"))}, section=section,)print(f"remeshed and refined: {len(slab.elements)} elements of {len(slab.elements[0].nodes)} nodes, " f"{len(slab.find_group_by_name('held_edge'))} nodes on the held edge")
model.add_pin_bc(nodes=slab.find_group_by_name("held_edge"))
show_viewer(model, units="mm")© 2026 Francesco Ranaudo · Text and pictures CC BY 4.0 · Code Elastic License 2.0 · how to reuse them